Musicam Roadrunner Bedienungsanleitung PDF herunterladen (Seite 20)

Prima LT USERS GUIDE

6-206-20

Using the encoder and decoder level adjustment enables up to 6 dB of

system gain or attenuation. Setting the decoder level lower than the

encoder level introduces attenuation, setting the decoder level higher

than the encoder level introduces gain. Please remember that system

attenuation or gain comes at the expense of dynamic range and

headroom.

6.1.5.4 Encoder Copy/Swap And Mono Mix

MENU NAVIGATION COMMAND WINDOWS RC DESCRIPTION

ECS N/A Set encoder copy or swap

mode

EMM N/A Set encoder mono mix

mode

In dual mono, stereo and joint stereo modes, audio input to the left

channel will be encoded as left channel audio, and audio input to the

right channel will be encoded as right channel audio. If mono is

selected, under normal operation, only the audio input to the left

channel is encoded.

The ECS command

allows you to exchange the left and right audio inputs (stereo modes) or

use the right input for mono. You can even copy one channel into the

other. If you want to use a stereo source for mono transmissions, you

can use any one of three different mono-mix settings available using the

EMM

command. The mono-mix choices are L+ R (M0), L+ R - 3 dB (M3), or

L+ R - 6 dB (M6) mixing.

You can use the Copy/Swap feature to instantly switch between two

monaural audio sources. You can even perform this switching remotely

using far-end remote control.

6.1.5.5 Decoder Copy/Swap And Mute

MENU NAVIGATION COMMAND WINDOWS RC DESCRIPTION

DCS N/A Set decoder copy or

swap mode

Fhint:

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Keine Kommentare

Musicam Roadrunner Bedienungsanleitung Seite 20